Top hobart airforce 12ci – Our Picks

In this article we will take a look at some of the best chosen hobart airforce 12ci . We would recommend using Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown as it is one of the best products currently available in the market

Top 9 hobart airforce 12ci – Our Picks

Best hobart airforce 12ci Review

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown

 in stock
13 new from $839.99
Free shipping
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • Built in Air Compressor
  • Cuts faster than oxy fuel
  • Smaller heat-affected zone for less warping
  • No gas pressure settings for flame tuning needed
  • More precise cut, thinner kerf, less slag to clean up

WeldingStop PK-10 Plasma Cutting Electrode 770791 Nozzle Tip 770795 for Hobart Airforce 12ci Torch Plasma Cutting Torch Consumables 770791 Electrode 770795 Tip

 in stock
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • The 770791 electrodes and 770795 tips are fitting in Airforce 12ci plasma cutting torch
  • 5 pieces x 770791 Plasma Cutting Electrode
  • 5 pieces x 770795 Plasma Cutting Nozzle / Tip
  • The package will including 5pcs 770791 electrodes and 5pcs 770795 tips, and these consumables will compatible with Hobart Airforce 12ci Plasma Cutter Torch
  • WS OEMed plasma cutting torch consumables, not original

Hobart AirForce 12ci Plasma Cutter with Built-In Air Compressor

 in stock
2 new from $1,355.00
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • Lightweight, powerful inverter design
  • New XT12R torch is more efficient and comfortable with an ergonomic handle and cables that are extra flexible
  • Built-in piston-driven air compressor
  • Cuts mild steel up to 1/8in. @ 10in. per minute; 1/4in. mild steel @ 3in. per minute
  • Also cuts stainless steel, aluminum, brass and copper

FLARING Plasma Cutter Non Touch 50 AMP 110/220V FL550D 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine

 in stock
1 used from $286.98
Free shipping
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • 【Non-Touch FL-550】Cuts rough,painted,rusty surfaces efficiently but produces minimal slag.Cut without touching the metal,better cutting quality and longer consumable life.(Breaker Recommendation:50A on 110V,30A on 220V)
  • 【Cutting Ability】10-50A dc output,1/2” ideal clean cut and 3/5'' maximum severance cut on 220V. 10-35A DC output,1/3" ideal clean cut and 2/5" maximum severance cut on 110V. Work with the non-hazardous compressed air to cut stainless steel,alloy steel,mild steel,copper,cast iron and chrome
  • 【Advanced IGBT Inverter】Save energy and noiseless, high cutting speed,cutting smoothly. The conversion line is easy to transfer from input 110V to 220V dual-frequency (110/120V 220/240V 50/60hz). Air pressure 60-70psi recommended.
  • 【Safe Design】Built-in over-heat,over-voltage protection,it is under-voltage protection.It is not only can be suitable for businesses and DIY users but also fully accommodating the demands of professional operators.
  • 【Warranty Assurance】We are a manufactory with over 10 years' experience of professionals producing the plasma cutter machines,2 year's warranty.Please add to cart and take it without hesitation

Miller Electric Stick Welder,Thunderbolt Series, Black, Width 7.125 in Height 10.5 in Length 13.375 in (907721)

 in stock
15 new from $699.00
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • Country of Origin : United States
  • Package dimensions : 15.6" L x 13.2" W x 13.3" H
  • Package weight : 22.9 Lbs
  • Package quantity :1

TOOLIOM Plasma Cutter 50A Non-Touch Pilot Air Plasma Cutter Inverter DC Digital Display IGBT Portable Cutting Machine 110V / 220V Dual Voltage

 in stock
1 used from $225.43
Free shipping
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • Non-touch ARC: The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
  • Up to 50A output, 15/64 inch clean cut and 31/64 inch maximum severance cut @ 220V.
  • Equipped with high frequency , more easier to ARC start. Efficiently cuts though rough, painted, and rusty surfaces.
  • Widely used for cutting stainless steel, alloy steel, mild steel, copper and other color metal materials.
  • Auto-voltage adapts to 110 V - 220 V input power. Plug adapters included.

Hobart 770794 Cup, Swirl Ring, O-Ring Kit for XT12R Plasma Torch

 in stock
5 new from $49.95
Free shipping
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • For use on Airforce 12i
  • Contains Cup, Swirl Ring, O-Ring
  • Compatible with XT12R Torch
  • This is a Hobart replacement part
  • Part Number 770794

Hobart - 500575 AirForce 27i Plasma Cutter

 in stock
4 new from $2,579.80
1 used from $1,500.00
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
  • XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
  • Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
  • Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.

Hobart AirForce 40i Plasma Cutter, Model:500576

 in stock
Amazon.com
as of November 8, 2021 12:34 pm

Features

  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
  • XT40R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
  • Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
  • Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.

The best hobart airforce 12ci brands

One of the things we suggest to most of our readers is to buy the hobart airforce 12ci from a well-known brand. Good brands provide, good quality products, great customer support, and have service centers in different places around the country. Regarding the hobart airforce 12ci I have a preference for the products of the brands listed below.

  • Hobart
  • WeldingStop
  • KhaoAuto
  • FLARING
  • MILLER ELECTRIC
  •  ZHEJIANG XINGYI VENTILATOR ELECTRICAL APPLIANCE CO., LTD
  • Hobart
  • hobart airforce 12ci – Buyer’s Guide

    There are some things you should consider when buying a hobart airforce 12ci. We spent 22 hours researching the most important things you should consider when buying a hobart airforce 12ci. So should we start with the list of things you should consider?

    1. Budget and price matching

    Make a list of the things you want in your hobart airforce 12ci and the price you are willing to pay for it. So try to look for a product in that price range and choose the one that appeals to you the most. One tip we would like to give you is: don’t settle for a cheaper product if it doesn’t even have a function you need.

    Most hobart airforce 12cis fall within the price range of $ 839.99 to $ 50.69. Therefore, if budget is not a problem and you want the best product for your needs, we advise you to choose the Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown.

    If you want something medium range, choose FLARING Plasma Cutter Non Touch 50 AMP 110/220V FL550D 1/2” Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine. If you have a very low budget, you can choose the one that is the Hobart 770794 Cup, Swirl Ring, O-Ring Kit for XT12R Plasma Torch

    2. Does it have all the features you need?

    Most importantly, the hobart airforce 12ci you are purchasing should have all the features you are looking for. In case you don’t even have one, don’t buy! We are saying this because you will not be able to use it for that purpose. If you are a person without budget problems, I would suggest you to choose the best model which is Hobart 770794 Cup, Swirl Ring, O-Ring Kit for XT12R Plasma Torch

    3. The brand

    Buying the hobart airforce 12ci from a reputable brand can actually make sense. Not only will it be better than others in terms of “build quality”, but it will also have some extra features, better customer support. Famous brands have multiple service centers across the country, so if you have any problems you can simply take your hobart airforce 12ci to one of their service centers.

    4. Warranty Matters!

    When you buy a hobart airforce 12ci from a well-known brand, you will get a guarantee. Low-cost products also come with warranties, but the claim process could be tougher. That’s why I always suggest you buy the product from a reputed brand and the one that comes under warranty. It will save you from repair costs in the future. On average, around 21% of people end up paying 40% of the product price for the service! You can save on service costs if the product is under warranty!

    5. Check out our website

    On our website we have experts in all categories and no matter what the product is, we have a better review or list about it. The products on our list are based on expert picks, advice and hours of research. That’s why when you buy something that’s listed on our best list, you won’t regret it. However, there is a possibility that we may not have covered the product you might be interested in, but if you come across something like this, please let us know via comments or contact us.

    FAQs

    What is the best hobart airforce 12ci?

    The best hobart airforce 12ci is the one that has all the features that meet your needs. I think the best is Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown

    Are there any good deals on hobart airforce 12ci?

    In the offline market, you won’t find many offers. However, I have chosen the best hobart airforce 12ci and have added links to Amazon which has deals and deals running on a regular basis.

    What is the cheapest hobart airforce 12ci?

    Although most of the cheaper hobart airforce 12ci do not have many features, but if you are looking for the best one at a low cost, my best bet would be on Hobart 770794 Cup, Swirl Ring, O-Ring Kit for XT12R Plasma Torch

    Where can I buy the hobart airforce 12ci?

    There are several places where you can buy it, but in my opinion, when it comes to the online marketplace, I wouldn’t recommend anything other than Amazon. It’s because their service is great!

    Why should you trust our website?

    We have been in the review business for more than 15 years and our motive is to help people buy the top rated products at the best price. We went through 22 to help you find the best hobart airforce 12ci

    Conclusion

    We hope you liked the hobart airforce 12cis that we have listed in our best list. If it was helpful, bookmark our site and share it with people you know whenever they intend to buy something.
    To conclude this guide,

  • If you are looking for the best hobart airforce 12ci: you should consider the idea of Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
  • If you want the one that has similar characteristics to the best, then you should consider WeldingStop PK-10 Plasma Cutting Electrode 770791 Nozzle Tip 770795 for Hobart Airforce 12ci Torch Plasma Cutting Torch Consumables 770791 Electrode 770795 Tip
  • If you want a hobart airforce 12ci that is “value for money”, choose Hobart AirForce 12ci Plasma Cutter with Built-In Air Compressor
  • If you want the cheapest hobart airforce 12ci, then Hobart 770794 Cup, Swirl Ring, O-Ring Kit for XT12R Plasma Torch should be the best for your needs!
  • Updated: November 8, 2021 — 12:34 pm